Search found 234 matches
Re: TSi NKET?
No there isn't. I use the Sling 4 NKET list as the baseline and just made some changes for things that are different from the Sling 4 with some notes. Since the TSi is based on the Sling 4, I'm sure that should be fine for when the time comes for the DAR. Since TAF in Torrance already finished and c...
Re: Aileron
On page W 9.1 - There is a isometric diagram of parts 8,9, and 10 for a hinge bracket assembly. I would expect that there would be a page between W 9.2 and W 9.3 that would illustrate and provide directions for the assembly of these parts. There is nothing - no mention of rivets required, or direct...
- Tue Jun 09, 2020 10:55 am
- Forum: Sling TSi
- Topic: New TSi Seats
- Replies: 17
- Views: 37005
Re: New TSi Seats
It looks like the bottom hinge has been changed to now be a solid part of the bottom and seat back.Cluemeister wrote: ↑Tue Jun 09, 2020 10:51 am How do these compare to the old seats, and why the design change?
The "old" design had a moving two-part hinge:
- Mon Jun 08, 2020 10:00 am
- Forum: General Discussion
- Topic: Sling Aircraft support
- Replies: 2
- Views: 176298
Sling Aircraft support
Hey all, As many of you are aware, the technical staff from Sling Aircraft in South Africa are very supportive of our community forum and are also browsing the forum and will be here to help answer questions beyond what us fellow builders have the answer to. If you have a question that you want to m...
- Mon Jun 08, 2020 9:27 am
- Forum: Sling TSi
- Topic: WIng Tip FIt
- Replies: 2
- Views: 6323
Re: WIng Tip FIt
I haven't tried fitting my Wingtips yet, but I'm wondering whether that is part expected to just bend up in place and held when the rivets are on.
I'll try to do a quick fit today and see if mine looks the same.
Will reply back then.
I'll try to do a quick fit today and see if mine looks the same.
Will reply back then.
- Sun May 31, 2020 1:10 pm
- Forum: Avionics & Electrical Systems
- Topic: CO Detector
- Replies: 5
- Views: 30846
Re: CO Detector
Yes, Adam from Midwest Panel worked with them after talking with a few months ago about it.
Re: Aileron
The Ailerons are next on the menu for me, I just finished the Pitot tube installation yesterday. Yes I'd say we'll need to rivet the balance tube first since you need to line up those holes with the pre-drilled holes in the tube and there's not much room for movement there before you do the alignmen...
- Tue May 26, 2020 9:13 pm
- Forum: Sling TSi
- Topic: Known building "Gotchas" for the Sling TSi
- Replies: 51
- Views: 2503721
Re: Known building "Gotchas" for the Sling TSi
You can see in the Finishing Kit instructions that those bottom 2 rivnut heads are visible that support my reading of the situation. So it looks you left the 4 upper Rivnuts alone? your solution looks great. Yes, just those 2 bottom ones were pushing on the spar, the ones above sit between the angl...