Page 1 of 1

Safety Alert #0012 - Replaced by Service Bulletin #0017

Posted: Tue Jun 30, 2020 11:32 am
by PhilipRueker
This has been replaced by Service Bulletin #0017: https://www.slingpilots.com/forum/viewt ... f=11&t=111

RELEASE DATE: 2020/06/30

EFFECTIVE DATE: 2020/06/30

SUBJECT: Potential risk of shearing of control stop plate rivers

MODELS AFFECTED: Sling 4 and Sling 4 TSi aircraft

COMPLIANCE TIME: Before the next flight

LABOUR TIME: Inspection only: 1 hour
Inspection and modification: 4 hours

DESCRIPTION: The Safety Alert provides the instructions for the inspection, and if required rectification, of the elevator control torque tube for Sling 4 and Sling 4 TSi aircraft. Internal quality checks have shown that elevator stop plates in some aircraft may have been assembled with aluminium 3.2 x 8 mm domed rivets instead of stainless steel 3.2 x 8 mm domed rivets. These aluminium rivets shear at a lower control stick load compared to the stainless-steel rivets, so it must be ensured that stainless steel rivets are installed.

https://us18.campaign-archive.com/?u=69 ... c5178ed6bb

Re: Safety Alert #0012 - Replaced by Service Bulletin #0017

Posted: Tue Jul 28, 2020 10:02 am
by PhilipRueker
This has been replaced by Service Bulletin 17 - https://www.slingpilots.com/forum/viewt ... f=11&t=111