Safety Alert #0012 - Replaced by Service Bulletin #0017

Everything from Changing oil, tires, to service bulletins and annual condition inspections to ensure we build and fly safely.
Locked
User avatar
PhilipRueker
Site Admin
Posts: 245
Joined: Sat Nov 23, 2019 11:40 am
Location: Washington, USA
Contact:

Safety Alert #0012 - Replaced by Service Bulletin #0017

Post by PhilipRueker »

This has been replaced by Service Bulletin #0017: https://www.slingpilots.com/forum/viewt ... f=11&t=111

RELEASE DATE: 2020/06/30

EFFECTIVE DATE: 2020/06/30

SUBJECT: Potential risk of shearing of control stop plate rivers

MODELS AFFECTED: Sling 4 and Sling 4 TSi aircraft

COMPLIANCE TIME: Before the next flight

LABOUR TIME: Inspection only: 1 hour
Inspection and modification: 4 hours

DESCRIPTION: The Safety Alert provides the instructions for the inspection, and if required rectification, of the elevator control torque tube for Sling 4 and Sling 4 TSi aircraft. Internal quality checks have shown that elevator stop plates in some aircraft may have been assembled with aluminium 3.2 x 8 mm domed rivets instead of stainless steel 3.2 x 8 mm domed rivets. These aluminium rivets shear at a lower control stick load compared to the stainless-steel rivets, so it must be ensured that stainless steel rivets are installed.

https://us18.campaign-archive.com/?u=69 ... c5178ed6bb
Building a Sling TSi in my Garage.
Build Log | Timelapse Progress Videos
User avatar
PhilipRueker
Site Admin
Posts: 245
Joined: Sat Nov 23, 2019 11:40 am
Location: Washington, USA
Contact:

Re: Safety Alert #0012 - Replaced by Service Bulletin #0017

Post by PhilipRueker »

This has been replaced by Service Bulletin 17 - https://www.slingpilots.com/forum/viewt ... f=11&t=111
Building a Sling TSi in my Garage.
Build Log | Timelapse Progress Videos
Locked