Jig for fuel tanks

Model Specific Discussions about the Sling TSi.
Post Reply
User avatar
ibgarrett
Posts: 192
Joined: Mon Aug 03, 2020 8:22 am
Location: Westminster CO
Contact:

Jig for fuel tanks

Post by ibgarrett »

I've been working on doing as much of the pre-work ahead of my kit arriving and the only thing I can think of at this point in time is a jig for doing the wing tanks. I found a really extensive video on YouTube from Vans on their fuel tanks at which makes it seem like the jig is a good way to go. The overall concept is pretty straight forward, two "U" shaped jigs to receive the parts. Does anyone know if a good source for any size/plans to build something like it for the Tsi wing?

Thanks - Brian
Brian Garrett
huzilulu
Posts: 30
Joined: Sat Dec 14, 2019 9:12 am
Location: Houston TX

Re: Jig for fuel tanks

Post by huzilulu »

Jig (drawings) are in the TSi Wing Build Manual (to scale)...
User avatar
ibgarrett
Posts: 192
Joined: Mon Aug 03, 2020 8:22 am
Location: Westminster CO
Contact:

Re: Jig for fuel tanks

Post by ibgarrett »

Thanks - I just didn't go far enough into the manual to see it. I appreciate the assistance.
Brian Garrett
Post Reply