New Fuel Level Sender Bending Detail

Model Specific Discussions about the Sling TSi.
Post Reply
Joe Azzarelli
Posts: 10
Joined: Tue May 31, 2022 9:52 am
Location: Florida

New Fuel Level Sender Bending Detail

Post by Joe Azzarelli »

The revised fuel level arm detail (sheet 27) in DC-KAI-002-X-F-6.4 does not work, for me at least.

The 181mm is way too long. What gives??

Thanks!,
Joe

#slingsupport
Sling Technical Official
Sling Aircraft Official
Posts: 41
Joined: Wed Dec 11, 2019 1:19 am
Location: Sling Head Office South Africa

Re: New Fuel Level Sender Bending Detail

Post by Sling Technical Official »

Hi Joe

You need to slide the fuel level sender base closer to the fuel tank root rib and drill 2 new mounting holes for it.
Make sure you have good clearance between the float ball and WG-RIB-204.
The new kits will have the holes drilled in the correct position.

Regards
Armin
Joe Azzarelli
Posts: 10
Joined: Tue May 31, 2022 9:52 am
Location: Florida

Re: New Fuel Level Sender Bending Detail

Post by Joe Azzarelli »

Sling Technical Official wrote: Thu Jan 12, 2023 10:16 pm Hi Joe

You need to slide the fuel level sender base closer to the fuel tank root rib and drill 2 new mounting holes for it.
Make sure you have good clearance between the float ball and WG-RIB-204.
The new kits will have the holes drilled in the correct position.

Regards
Armin
That makes sense. Thanks for the response!

Joe
STGove
Posts: 27
Joined: Thu Dec 08, 2022 9:08 am
Location: League City, TX
Contact:

Re: New Fuel Level Sender Bending Detail

Post by STGove »

I have been looking at this:

https://ciescorp.net/products/magneto-r ... uid-level/


Thoughts?
Respectfully,
Steve & Emily Gove
First time Sling TSi Builders - League City, Tx
N720S (Reserved)
YouTube = N720S
HAM W1WHO
Cell: 713.818.5800
eMail: SteveEmilyGove@gmail.com
Venit inferni, sive in excelsum aqua - TEXAS Strong!
User avatar
ibgarrett
Posts: 192
Joined: Mon Aug 03, 2020 8:22 am
Location: Westminster CO
Contact:

Re: New Fuel Level Sender Bending Detail

Post by ibgarrett »

This was my video on using the Cies Fuel sensors in my SlingTsi build

Brian Garrett
Post Reply