EGT Probe pinning tool
Posted: Wed Aug 18, 2021 11:03 am
Support,
I emailed you the message below yesterday and have not heard back from you. Please look for an email from Doug@GoodrichAviation.com. I am not able to easily add the pictures in this post.
Thank you.
_____________________
Good day,
I need some help with an Sling 2 S-LSA N517JT. It has a bad EGT probe. I am not able to find a de-pinning tool for the Souriau connector you installed during its manufacture. Do I need the Souriau specific de-pinning tool and do I need special pins? I have tried several Garmin and AMP tools and nothing has worked. Is the pin different from the Westach original probe found here?:
https://www.aircraftspruce.com/catalog/ ... kkey=29572
Also, I wanted to pass along that the brackets on the muffler tailpipe have cracked on both sides of the tailpipe. I plan to have it welded locally but I wanted to let you know about it.
I have attached pictures of the connector and muffler.
#slingsupport
Thanks for your help,
Doug
I emailed you the message below yesterday and have not heard back from you. Please look for an email from Doug@GoodrichAviation.com. I am not able to easily add the pictures in this post.
Thank you.
_____________________
Good day,
I need some help with an Sling 2 S-LSA N517JT. It has a bad EGT probe. I am not able to find a de-pinning tool for the Souriau connector you installed during its manufacture. Do I need the Souriau specific de-pinning tool and do I need special pins? I have tried several Garmin and AMP tools and nothing has worked. Is the pin different from the Westach original probe found here?:
https://www.aircraftspruce.com/catalog/ ... kkey=29572
Also, I wanted to pass along that the brackets on the muffler tailpipe have cracked on both sides of the tailpipe. I plan to have it welded locally but I wanted to let you know about it.
I have attached pictures of the connector and muffler.
#slingsupport
Thanks for your help,
Doug