Perfect. Now to get the right length of cable.
Plans call for 1m of 4 core 18 AWG. Well... the cable sent was 1.29m. And it is not long enough. But let me check again. I like how you ran it!
Thanks,
Rick Nurkka
Search found 5 matches
- Thu Sep 08, 2022 4:23 pm
- Forum: Sling TSi
- Topic: Vertical Stabilizer - VOR/Light Cables
- Replies: 6
- Views: 42763
- Mon Sep 05, 2022 2:24 pm
- Forum: Sling TSi
- Topic: Vertical Stabilizer - VOR/Light Cables
- Replies: 6
- Views: 42763
Vertical Stabilizer - VOR/Light Cables
Run them together? Widen the holes new grommets? Or what has everyone done who has both the light on top and VOR antennae?
Thanks,
Rick Nurkka
Thanks,
Rick Nurkka
- Wed Aug 24, 2022 9:37 am
- Forum: Sling TSi
- Topic: Countersinking
- Replies: 2
- Views: 11031
Re: Countersinking
Ah figured it out at least for this part. Of course had to enlarge the current holes. So the #30 works fine on these.
- Fri Aug 19, 2022 6:29 pm
- Forum: Sling TSi
- Topic: Rivnuts - torque setting 20v drill
- Replies: 1
- Views: 8217
Rivnuts - torque setting 20v drill
I have the Bauer 20v Drill using the Asto rivnut ADN14 rivet nut drill adapter kit. Says to test it first. QB. No real spare parts to play with. 22 M4 Rivnuts in the VS portion. Need to use 22. Drill manual is not very informative. Any one using this drill? Settings used? Or thoughts around what set...
- Fri Aug 19, 2022 6:24 pm
- Forum: Sling TSi
- Topic: Countersinking
- Replies: 2
- Views: 11031
Countersinking
Been reading about the countersinking from Phil. 120 degree is best. Question though. Right out of the gate, Horizontal stabilizer. 8 holes on each side. The 120 degree countersink bit I can find online is too large for these holes. What did everyone else use? 100 degree on these? Two part 4's page ...