Search found 41 matches
- Tue Dec 28, 2021 11:16 pm
- Forum: Sling TSi
- Topic: TSi Quick Build Question:
- Replies: 6
- Views: 15472
Re: TSi Quick Build Question:
The quick build aircraft supplied by the factory are assembled with alodined parts. The balance of the kit parts are supplied with the protective film and label on it. The kit builder will have to alodine or prime these parts before assembly.
- Thu Oct 14, 2021 5:14 am
- Forum: Firewall forward
- Topic: Prop Orientation
- Replies: 1
- Views: 16081
Re: Prop Orientation
Hi,
The orientation of the propeller does not matter when mounting it to the engine, especially with the three blade. What is more important is that the propeller is well balanced.
The orientation of the propeller does not matter when mounting it to the engine, especially with the three blade. What is more important is that the propeller is well balanced.
- Thu Sep 02, 2021 12:03 am
- Forum: Sling TSi
- Topic: Fuel Capacity - Mains, new mains & Long Range?
- Replies: 5
- Views: 10768
Re: Fuel Capacity - Mains, new mains & Long Range?
Hi, Apologies for the confusion caused, and herewith an explanation: In mid 2020, the main tanks were increase in size from 88L to 99L per side. This was done by increasing span-wise length of the tank by one rib. The long range tanks are separate from the main tanks, and are located in the leading ...
- Mon Jul 19, 2021 5:15 am
- Forum: Sling 4
- Topic: Part number for canopy gas struts?
- Replies: 2
- Views: 86174
Re: Part number for canopy gas struts?
Hi Geoff,
As per your link, this is the correct Gas strut.
As per your link, this is the correct Gas strut.
- Fri Jun 18, 2021 2:56 am
- Forum: Sling TSi
- Topic: Baggage Door on Quickbuild
- Replies: 3
- Views: 18248
Re: Baggage Door on Quickbuild
Hi, We have prepared instructions, with pictures, to bend the door correctly. This does however involve drilling the current rivets out. Attempt the method suggested by MTJ, otherwise please post your email here and we will email you the instructions. Alternatively, send an email to technical@slinga...
- Mon Jun 14, 2021 1:56 am
- Forum: Sling HW
- Topic: Can I operate a Sling HW at my strip?
- Replies: 3
- Views: 17701
Re: Can I operate a Sling HW at my strip?
Hi, We are still developing the take-off and landing performance tables for varying weights and altitudes, but we do have preference information at MAUW of 1,050kg. The tests were conducted at MSL on a smooth and level tar runway: Takeoff: Roll: 270m (shorter possible with STOL procedures, around 23...
- Mon May 31, 2021 11:31 pm
- Forum: Sling 4
- Topic: Sling 4 LR tank details ?
- Replies: 2
- Views: 14076
Re: Sling 4 LR tank details ?
Hi Geoff,
Sling 4 Long Range Tank Information (LR Tanks):
The LR tanks are 60L a side for the Sling 4.
The arm is 1783mm.
The transfer pump flow rate is 120 l/hr.
Sling 4 Long Range Tank Information (LR Tanks):
The LR tanks are 60L a side for the Sling 4.
The arm is 1783mm.
The transfer pump flow rate is 120 l/hr.
- Mon May 31, 2021 11:19 pm
- Forum: Avionics & Electrical Systems
- Topic: Static Wicks (dischargers) Installation #slingsupport
- Replies: 6
- Views: 24617
Re: Static Wicks (dischargers) Installation #slingsupport
Hi, Using nutplates would allow easy servicing (replacing) of the static wicks, and would be the preferred method if the control surfaces (rudder / ailerons) are still open. If they are closed (assembled) then make use of blind rivets, they will fulfill the same purpose. Correct, add the wicks to th...
- Wed Apr 07, 2021 7:03 am
- Forum: Avionics & Electrical Systems
- Topic: Static Wicks (dischargers) Installation #slingsupport
- Replies: 6
- Views: 24617
Re: Static Wicks (dischargers) Installation #slingsupport
Hi, You are correct in that there are no static wicks on the aircraft at the moment. We are currently testing the use of static wicks on the aircraft, namely on the wing tips and the top of the rudder (x3 wicks in total). The wicks can be mounted to the top of the rudder, and the tip of each aileron...
- Tue Apr 06, 2021 10:26 pm
- Forum: Priming & Painting
- Topic: Alodine/Bonderite Treatment
- Replies: 6
- Views: 23841
Re: Alodine/Bonderite Treatment
I believe the Factory now actually default alodines some of the parts as I've seen on some pictures from newer kits, so you might not even have to do it yourself anymore. Can #slingsupport confirm that's the case now? It is standard procedure at the factory to alodine aluminum parts for RTF (Ready ...