Search found 62 matches
- Mon Jun 07, 2021 9:02 am
- Forum: Sling TSi
- Topic: GMU 11 Installed in Right Wing
- Replies: 5
- Views: 13727
Re: GMU 11 Installed in Right Wing
Hi - We will see how it works out, but I just installed mine on the access cover - with the connector facing the fuselage. The tricky thing is the wiring - I ran it down the gap between the rear spar and the ribs. Won't know if it works for several months.
- Mon Mar 15, 2021 2:39 pm
- Forum: Sling TSi
- Topic: New TSi Seats
- Replies: 17
- Views: 37164
Re: New TSi Seats
No, look at the two holes in the seat base itself. Inside, there are reinforcement plates for these holes. https://photos.app.goo.gl/61REa3MMXnpWLSGv7
#slingsupport
#slingsupport
- Sun Mar 14, 2021 7:04 pm
- Forum: Sling TSi
- Topic: Parachute option
- Replies: 1
- Views: 5193
Parachute option
The rear spar attach points for the cables are just out of reach for the cables themselves - I cannot get the bolt though the hole as the cable is just not long enough - though barely not so. Should I hog out the attach-point holes in the fuselage using a drill, or perhaps use smaller diameter bolts...
- Sun Mar 14, 2021 6:59 pm
- Forum: Sling TSi
- Topic: Pitot Tube
- Replies: 4
- Views: 10244
Pitot Tube
My quickbuild wing came with two pitot lines - pitot and angle of attack. The pitot is a regulated pitot which means that it is capable of regulating when it needs to be on and how much heat to provide as well as providing a feedback loop to instruments to let you know it is indeed working. The pito...
- Sun Mar 14, 2021 6:51 pm
- Forum: Sling TSi
- Topic: New TSi Seats
- Replies: 17
- Views: 37164
Re: New TSi Seats
I have the bench back seat. The seat base has what appear to be Dzus fastener holes in the outside margins of the seat base (with a reinforcement plate) Though the plates were supplied, they are not in the parts list or instructions, though I figured out where they go. The current instructions do no...
- Wed Mar 03, 2021 4:28 pm
- Forum: Sling TSi
- Topic: New TSi Seats
- Replies: 17
- Views: 37164
Re: New TSi Seats
All the time you spent as a youth with Lego kits will be rewarded with the seat mechanism. Pay special attention the "Gotchas" above on figuring out when you can safely rivet. Also, read carefully about countersinking the seat base rivets. Cleco until you are absolutely sure you can rivet ...
- Mon Mar 01, 2021 3:54 pm
- Forum: Sling TSi
- Topic: New TSi Seats
- Replies: 17
- Views: 37164
Re: New TSi Seats
For the new seats - the instructions say to start riveting from the back. However, I suspect that the bottom row of rivets for the headrest plate should be riveted from the front. Any thoughts?
#slingsupport
#slingsupport
- Wed Nov 25, 2020 5:41 am
- Forum: Sling TSi
- Topic: Tsi Extra Parts available
- Replies: 5
- Views: 24930
Re: Tsi Extra Parts available
You might want to check to make sure that the reinforcing angles were installed along with your channel. Mine were not, nor were they included in my parts list - but TAF said they needed to be installed.
- Tue Nov 24, 2020 11:45 am
- Forum: Sling TSi
- Topic: New TSi Seats
- Replies: 17
- Views: 37164
Re: New TSi Seats
Well, I think I figured out that I have a franken-config regarding the seats. Fortunately, I have yet to sink the rivets, but my cleco-ing has been an interesting process. I believe I have: 1 Two seat bottoms and backs that are old style 2 One custom made seat bottom and rails of the new style to ge...
- Tue Nov 24, 2020 10:12 am
- Forum: Sling TSi
- Topic: New Canopy Strut Design
- Replies: 6
- Views: 13810
Re: New Canopy Strut Design
Is there a setting that I need for Dropbox to ensure that I am seeing any new files that are being posted? For instance, my Canopy Kit KAI on Dropbox says it was updated on 3/6/2020. Is that correct?