Ground terminals HIC and ECU connectors

Steam Gauges, Glass Cockpit, IFR Navigators, VOR Antennas,etc.
Post Reply
msytsema
Posts: 1
Joined: Sat Feb 26, 2022 11:45 am
Location: Netherlands
Contact:

Ground terminals HIC and ECU connectors

Post by msytsema »

Does anyone know what to do with the four 6mm ring terminal grounds in the Rotax 915is wiring harness near the HIC connectors and the ECU connectors?

We attached them to the airframe at first, but in the Rotax documentation we think they instruct us to connect them to Reg A of the fusebox (in that case we have to make another isolated go-thru the F/W to Reg A). But we read mixed advices on that subject on the internet. Some say to the airframe ground, others say Reg A/EMS ground. What is the right thing to do?
Post Reply