Composite/Fiberglass End Pieces

How to work with the fiberglass components of the Sling build.
MTJ
Posts: 30
Joined: Mon Dec 09, 2019 7:53 am
Location: KCDC

Re: Composite/Fiberglass End Pieces

Post by MTJ »

My kit (delivered March 2020) came with a Rudder Tip that was not reinforced.

It was also misshapen on one side so I had to order a replacement. I will be putting a metal strip inside.

WmInce
Posts: 19
Joined: Sun Jan 05, 2020 2:24 pm
Location: Clearwater, Florida

Re: Composite/Fiberglass End Pieces

Post by WmInce »

Which airplane?
As this was posted under "General Building Topics."
Thank you. :D
Bill Ince
Retired Heavy Equipment Operator
Clearwater, Florida

MTJ
Posts: 30
Joined: Mon Dec 09, 2019 7:53 am
Location: KCDC

Re: Composite/Fiberglass End Pieces

Post by MTJ »

Sorry, Tsi.

MTJ
Posts: 30
Joined: Mon Dec 09, 2019 7:53 am
Location: KCDC

Re: Composite/Fiberglass End Pieces

Post by MTJ »

Anyone have a "pre=fit" photo of the composite wingtips? I just want to see how others looked. I seem to have large gaps with the skins

(gotcha? no instructions noted on mounting the tip lights that I could find... another manual?)

Thank you

WmInce
Posts: 19
Joined: Sun Jan 05, 2020 2:24 pm
Location: Clearwater, Florida

Re: Composite/Fiberglass End Pieces

Post by WmInce »

Which airplane?
Bill Ince
Retired Heavy Equipment Operator
Clearwater, Florida

Post Reply