Cleaning and protecting airframe
-
- Posts: 27
- Joined: Mon Dec 07, 2020 8:55 am
- Location: Somerset West, Cape Town. South africa
Cleaning and protecting airframe
Any recommendations on what product to use when cleaning and washing the airframe .
Re: Cleaning and protecting airframe
This question is under "Priming & Painting" So I'll bite..
Pre painting, (I am painting my aircraft myself) I am using a grey then a white scotchbrite pad and MEK to clean the surface. I have heard that alcohol is good as well. Then, the chromate primer followed by the paint. After a year I will apply Corrosion X.
Should be good go on long term airframe protection.
Pre painting, (I am painting my aircraft myself) I am using a grey then a white scotchbrite pad and MEK to clean the surface. I have heard that alcohol is good as well. Then, the chromate primer followed by the paint. After a year I will apply Corrosion X.
Should be good go on long term airframe protection.
- PhilipRueker
- Site Admin
- Posts: 245
- Joined: Sat Nov 23, 2019 11:40 am
- Location: Washington, USA
- Contact:
Re: Cleaning and protecting airframe
If you're asking about cleaning once the plane is completed and painted, then for the airframe exterior itself, most people use Simple Green Aircraft Formula.
It's very important you only use the Aircraft Formula and not the normal soap one as that could deteriorate the metal.
For the window, you want to use a Plexi Glass cleaner like Plexus and use microfiber cloths to be careful to avoid scratching it.
It's very important you only use the Aircraft Formula and not the normal soap one as that could deteriorate the metal.
For the window, you want to use a Plexi Glass cleaner like Plexus and use microfiber cloths to be careful to avoid scratching it.
-
- Posts: 27
- Joined: Mon Dec 07, 2020 8:55 am
- Location: Somerset West, Cape Town. South africa
Re: Cleaning and protecting airframe
Thankyou Philip
Apologies for responding so long after your reply.
Thanks for the good advice
Regards
Glenn
Apologies for responding so long after your reply.
Thanks for the good advice
Regards
Glenn