I have the Bauer 20v Drill using the Asto rivnut ADN14 rivet nut drill adapter kit.
Says to test it first. QB. No real spare parts to play with. 22 M4 Rivnuts in the VS portion. Need to use 22.
Drill manual is not very informative.
Any one using this drill? Settings used? Or thoughts around what setting to use?
Appreciate the assistance.
Rick Nurkka
Rivnuts - torque setting 20v drill
-
- Posts: 4
- Joined: Tue Oct 27, 2020 3:19 pm
- Location: New Zealand
- Contact:
Re: Rivnuts - torque setting 20v drill
I would suggest starting with the absolute lowest. I use the Astro kit with an 18V Ryobi and the minimum torque setting works fine. The worst thing that will happen if your torque is too low is that the nut just won't set, too high and you risk damaging the part or not setting it properly. I'd suggest sourcing
some scrap first to get the hang of it.
some scrap first to get the hang of it.